Free Crochet Spring Time Pocket Car Tissue Cover Pattern

Did your car pocket tissues transform into a crumpled, mysterious mass at the bottom of your handbag or glovebox again?

Give those handy travel tissues a glamorous spring makeover with this vibrant, flower-adorned pocket tissue cover!

Crafted as a single textured rectangle that folds into a sleek pouch, this project features neat color-blocked edgings, delicate five-petal blossoms, and leafy accents centered with pearl beads.

Whether you are stocking your craft fair booth with eye-catching handmade treasures or stitching a thoughtful gift, this project turns everyday utility into pure crochet joy.

Materials and Preparation

Materials:

• Main Yarn: Premier Cotton Fine Yarn (Weight #2 Fine / Sport, 52% Cotton, 48% Acrylic; approx. 317 yds / 290 m per 3.5 oz / 100 g ball).
  • Main Color (MC): Approx. 1 to 1.5 oz (30 to 45 g) for the cover body (e.g., Bright Blue, Pink, White, or Yellow).
  • Accent Color 1 (Opening Trim): Approx. 3 yards of fine weight yarn (e.g., Yellow, White, or contrasting shade).
  • Accent Color 2 (Flowers): Approx. 3 to 5 yards of fine weight yarn (e.g., Pink, White, Blue, or Yellow).
  • Accent Color 3 (Leaves): Approx. 3 to 5 yards of Leaf Green yarn (Color #2710 Leaf Green).
• Embellishments: Two 1/4-inch (6 mm) diameter pearl or decorative beads.
• Tissue Pack: Standard pocket-sized travel tissue pack (e.g., Kleenex pocket pack).

Tools:

• Crochet Hook: Size US G-6 / 4.00 mm crochet hook.
• Yarn Needle: Tapestry needle for sewing seams and weaving ends.
• Hot Glue Gun & Glue Stick: For attaching decorative center beads to flowers.
• Scissors: Craft scissors.

Preparation Notes:

• Work the body stitches into the back bump of the foundation chain to create a clean, finished edge along the front tissue opening.
• Ensure your gauge is consistent so the finished cover fits snugly around a standard travel tissue pack without sagging.

Abbreviations and Notes

Abbreviations:

• ch: chain
• sc: single crochet
• hdc: half double crochet
• dc: double crochet
• sl st: slip stitch
• st(s): stitch(es)
• MC: main color
• rep: repeat
• YO: yarn over

Pattern Notes:

• The tissue cover body is worked flat in rows using a rich, alternating stitch texture (single crochet and double crochet).
• The piece is folded inwards from both short ends toward the center wrong-side out, then whip-stitched along the top, bottom, and center opening edges before being turned right-side out.
• Decorative flowers and leaves are crocheted separately and stitched onto the front corners over the seam joinings.
• Original design and pattern credit belongs to Creative Grandma.

Gauge, Approximate Size, and Pattern Notes

Gauge:

• 16 stitches and 15 rows = 4 inches (10 cm) in textured pattern stitch using a 4.00 mm hook.

Finished Size:

• Length: Approx. 5 inches (12.7 cm).
• Width: Approx. 2.75 inches (7 cm) when folded and fitted over a pocket tissue pack.

Special Techniques:

• Back Bump Working: Inserting the hook into the back loop/ridge of the foundation chain on Row 1 to produce a neat chain-like edge on both sides of the center tissue slot.
• Whip Stitching Seams: Joining the folded edges from the wrong side and reinforcing stress points at the center opening with double stitches.

Step-by-Step Pattern

Part 1: Main Body Cover

Worked flat in alternating single and double crochet stitches using Main Color yarn:

• Foundation: Ch 22.
• Row 1: Turning work to locate the back bump (center ridge) of the chain: skip first ch, sc in back bump of 2nd ch from hook. *Dc in back bump of next ch, sc in back bump of next ch; rep from * across to end of chain. Turn. (21 sts)
• Row 2: Ch 1 (does not count as st here and throughout), skip beginning ch-1, sc in first 2 sts. *Dc in next st, sc in next st; rep from * across to last st, sc in last st. Turn. (21 sts)
• Row 3: Ch 1, skip beginning ch-1, sc in first st. *Dc in next st, sc in next st; rep from * across to last 2 sts, dc in next st, sc in last st. Turn. (21 sts)
• Rows 4–23: Repeat Rows 2 and 3 ten times. (21 sts)
• Row 24: Repeat Row 2 once more. (21 sts) Fasten off, leaving a 24-inch (60 cm) tail for sewing seams.

Part 2: Assembly and Edging

Seaming the Body Pouch:

1. Turn the piece to the wrong side.
2. Fold both short ends (Row 24 and Row 1) inward so they meet precisely in the middle on the wrong side.
3. Thread the 24-inch yarn tail onto a tapestry needle. Whip-stitch across the top folded edge from corner to center. Double-stitch at the center join for durability. Whip-stitch across the remaining top edge to the opposite corner.
4. Whip-stitch 5 stitches inward along the center overlapping seam from the top edge toward the middle, double-stitching at the 5th stitch to reinforce the opening. Secure and weave in yarn tail.
5. Attach a new 24-inch strand of yarn at the bottom corner. Repeat the whip-stitching process across the bottom folded edge and 5 stitches inward along the center seam. Turn the cover right-side out through the center slot.

Center Opening Trim:

Join Accent Color 1 yarn with sl st at the bottom corner of the center opening:

• Rnd 1: Ch 1, work 1 sc in each st across the first side of the opening to the joining seam, work 1 sc into the joining seam, work 1 sc in each st across the opposite side of the opening to the next joining seam, work 1 sc in the seam. Join with sl st to first sc.Fasten off and weave in ends inside the cover.

Part 3: Decorative Appliqués

Flower (Make 2):

Worked in Accent Color 2 yarn into a single central chain:

• Foundation: Ch 2.
• Petal 1: Working all stitches into the 2nd ch from hook: 2 hdc, ch 1, sl st into same ch.
• Petals 2–5: *Ch 1, 2 hdc in same ch, ch 1, sl st in same ch; rep from * 3 more times. (5 petals total) Fasten off, leaving a 10-inch yarn tail for sewing. Pull the starting yarn tail to close the center hole tightly.

Leaf (Make 4):

Worked in Leaf Green yarn along both sides of a foundation chain:

• Foundation: Ch 4.
• Round 1: Skip 1st ch, sl st in 2nd ch from hook, sc in next ch. Work 5 hdc into the last ch (working around the end of the chain to the opposite side). Working along the underside of the chain: sc in next ch, sl st in next ch. Sl st in top loop of the first stitch at the tip of the leaf.Fasten off, leaving an 8-inch yarn tail for sewing.

Part 4: Assembly and Finishing

1. Leaf Placement: Position 2 leaves at each end of the center tissue opening on the front of the cover. Point the tips toward the outer corners while keeping the rounded bases near the center slot.
2. Sewing Leaves: Using the yarn needle and green yarn tails, stitch down the center ridge and tips of each leaf securely onto the main body.
3. Sewing Flowers: Place 1 flower over the joined stem bases of each leaf pair at both ends of the opening. Stitch securely around the flower centers, ensuring no stitches block the opening elastic/stretch.
4. Bead Embellishment: Apply a tiny dab of hot glue in the center of each flower using a glue gun. Press 1 pearl bead firmly into the center of each blossom (ensuring bead holes face sideways).
5. Tissue Insertion: Slide a pocket tissue pack through the center slot, adjust corners, and pull the first tissue through the neat center slit!

Detailed Pattern Breakdown

1. Main Body Construction Breakdown

The main cover body uses a single rectangular piece built with alternating single crochet and double crochet stitches:

• Row 1: Starting in the back bump of the chain preserves the pristine chain loops for the front opening edges. Alternating sc and dc creates a firm, non-gapping fabric.
• Rows 2–24: Repeating the offset sc and dc sequence creates a rich grit-stitch texture that gives the cover structural stability and elasticity, keeping tissues securely encased.
• Seaming Strategy: Folding short ends to meet in the center transforms a simple flat rectangle into a functional pocket holder. Reinforcing 5 stitches on each side of the opening prevents ripping when pulling tissues out.

2. Opening Trim and Embellishments Breakdown

• Center Opening Trim: Working a round of single crochet around the raw slit provides a neat, contrasting frame while stabilizing the opening edges against stretching over time.
• Five-Petal Flowers: Moccaccino/cherry-blossom style construction by packing 5 petal sets (ch 1, 2 hdc, ch 1, sl st) into a single second chain creates a compact, dimensional bloom without needing a ring.
• Leaves: Working 5 hdc into the terminal chain loop acts as a smooth 180-degree turn, allowing continuous stitching along both sides of the foundation chain for an organic leaf silhouette.

3. Structural Assembly Logic Breakdown

• Corner Rounding Whip-Stitch: Pulling whip-stitches snugly around the folded outer corners rounds off harsh angles, yielding a tailored fit for rectangular tissue packs.
• 3D Layering: Layering leaves angled toward outer corners underneath central flowers conceals raw end-joins while adding depth and charm to the tissue cover exterior.

Pattern Question

Question: How can I ensure the tissue pack fits snugly inside the cover without the center opening gaping open or tearing at the corners?

Answer: To achieve a perfect tailored fit, maintain a consistent stitch gauge and use the recommended fine weight yarn. When seaming the body, make sure to double-stitch the 5th whip-stitch on each side of the center opening where stress is highest.

When inserting the tissue pack, fold it slightly in half to slide it gently through the slit before smoothing it flat inside the pouch.