How to Crochet a Cute Ghost with Frog Hat (Free Pattern)

Ever wondered what happens when a spooky Halloween ghost decides to get stylish? It puts on a cozy, bright green frog hat, of course!

This adorable Crochet Ghost with Frog Hat plushie is the ultimate mashup of creepy-cute amigurumi.

Whether you are searching for a fun Halloween desk buddy, a handmade gift for a frog lover, or a quick weekend stash-buster, this charming little phantom is sure to bring a smile to anyone’s face.

Materials and Preparation

Materials:

• Yarn (Milk Cotton Yarn recommended):
  • White Yarn: For the ghost body and small inner eye patches.
  • Green Yarn: For the frog beanie and outer frog eye sockets.
  • Pink Yarn: Small amount for embroidering the sweet mouth line.
• Safety Eyes:
  • 1 pair of larger safety eyes for the ghost face.
  • 1 pair of smaller safety eyes for the frog hat eyes.
• Stuffing: Fiberfill / Polyfill stuffing (optional for arms or body base if needed).
• Blush: Pink powder blush or fabric chalk to paint rosy cheeks.
• Craft Glue: Hot glue gun for securing safety eye posts and assembling parts.

Tools:

• Crochet Hook: Size 2.5 mm.
• Yarn Needle: For weaving ends and sewing the frog eyes and arms.
• Stitch Marker: To keep track of rounds.
• Scissors: For cutting yarn.

Preparation Notes:

• You should be familiar with fundamental US crochet terms such as magic ring (MR), single crochet (sc), half double crochet (hdc), double crochet (dc), treble crochet (tr), increases (inc), and slip stitches (sl st).
• Keep your tension moderately tight during the amigurumi parts so that the shapes stay firm and defined without loose stitches.

Abbreviations and Notes

Abbreviations:

• MR: Magic Ring
• ch: Chain
• sc: Single Crochet
• inc: Single Crochet Increase (2 sc in the same stitch)
• hdc: Half Double Crochet
• dc: Double Crochet
• tr: Treble Crochet (Triple Crochet)
• sl st: Slip Stitch
• st(s): Stitch(es)

Pattern Notes:

• Most parts are worked in joined rounds: finish each round with a slip stitch (sl st) into the first stitch, then ch 1 before starting the next round.
• When finishing joined rounds, tighten your slip stitch and chain 1 to make the join seamless and invisible.

Gauge, Approximate Size, and Pattern Notes

Gauge:

Exact gauge is not crucial for this project. However, maintaining consistent tension ensures all hat and body pieces fit together perfectly.

Finished Size:

The completed ghost stands approximately 3 inches (7.6 cm) tall including the frog hat.

Special Techniques:

• Ruffle Skirt Edge: Combines sc, hdc, dc, and sl st in a repeated sequence across the bottom hem to create a natural wavy ghost skirt.
• Hat Brim Shaping: Uses varying stitch heights (sc, hdc, dc, tr) to form an arched, sculpted brim that frames the ghost’s face.

Step-by-Step Pattern

Part 1: Main Ghost Body

Worked in joined rounds using White Yarn:

• R1: MR 6 sc, sl st to join, ch 1 (6)
• R2: 6 inc, sl st, ch 1 (12)
• R3: (1 sc, inc)*6, sl st, ch 1 (18)
• R4: (1 sc, inc, 1 sc)*6, sl st, ch 1 (24)
• R5–R9: 24 sc across (5 rounds total), sl st, ch 1 (24)
• R10: (3 sc, inc)*6, sl st, ch 1 (30)
• R11: (2 sc, inc, 2 sc)*6, sl st, ch 1 (36)
• R12: (5 sc, inc)*6, sl st, ch 1 (42)
• R13 (Wavy Skirt): (1 sc, 1 hdc, 1 dc, 1 hdc, 1 sc, 1 sl st)*7 (42) Fasten off, cut yarn, and weave in ends using a yarn needle.

Part 2: Frog Hat

Worked in joined rounds using Green Yarn:

• R1: MR 8 sc, sl st to join, ch 1 (8)
• R2: 8 inc, sl st, ch 1 (16)
• R3: (1 sc, inc)*8, sl st, ch 1 (24)
• R4–R5: 24 sc across (2 rounds total), sl st, ch 1 (24)
• R6 (Arched Brim): 4 sc, 1 hdc, 1 dc, 2 tr, 1 dc, 1 hdc, 4 sc, 1 hdc, 1 dc, 2 tr, 1 dc, 1 hdc, 4 sc, sl st to join (24) Fasten off and weave in loose ends.

Part 3: Facial Details & Accessories

Head: Frog Eyes (Make 2 Outer Green & 2 Inner White)

Outer Green Sockets (Make 2 using Green Yarn):

• R1: MR 5 sc, sl st, ch 1 (5)
• R2: 5 inc, sl st, ch 1 (10) Fasten off, leaving a long tail for sewing to the hat.

Inner White Patches (Make 2 using White Yarn):

• R1: MR 5 sc, sl st (5) Fasten off without chaining, cut yarn, and hide the end behind the piece.

Body: Arms (Make 2 using White Yarn)

Worked in continuous or joined rounds:

• R1: MR 5 sc (5)
• R2–R3: 5 sc (2 rounds total) (5)
• R4: 1 sl st (5) Fasten off, leaving a long tail for sewing.

Part 4: Assembly & Finishing

1. Assemble Frog Eye Details:
   • Apply a tiny dab of hot glue to the back of each white circle and attach it onto the green socket.
   • Insert/glue a small safety eye into the center of each white circle.
   • Sew the completed frog eye assemblies onto the top left and right sides of the frog hat.
2. Assemble Ghost Face & Hat:
   • Place the frog hat on top of the ghost body (tilt straight or slightly sideways for extra personality).
   • Secure the hat to the ghost body with hot glue around the inner edge.
   • Attach the two larger safety eyes onto the ghost body right underneath the hat brim using hot glue.
   • Using pink yarn and a needle, embroider a small horizontal line or smile between the eyes.
   • Apply soft pink powder blush on both cheeks with a makeup brush or cotton swab.
3. Attach Arms:
   • Sew the two small white arms onto the left and right sides of the ghost body, positioned just below the hat brim.

Detailed Pattern Breakdown

1. Main Ghost Body Breakdown:

• Sphere to Cone Expansion (R1–R4): Starts with a standard magic ring of 6 single crochets (MR 6 sc) and increases systematically up to 24 stitches, forming the top dome of the head.
• Straight Body Tube (R5–R9): Maintains 24 stitches over 5 rounds to build height for the ghost’s face.
• Flared Base (R10–R12): Expands the stitch count from 24 to 42 stitches through gentle increase rounds (30 → 36 → 42), creating a wide base.
• Ruffled Skirt Hem (R13): Creates a wavy ghost drape by repeating a gradient sequence of stitch heights: 1 sc, 1 hdc, 1 dc, 1 hdc, 1 sc, 1 sl st across the bottom.

2. Frog Hat Breakdown:

• Crown Dome (R1–R3): Starts with MR 8 sc and expands to 24 stitches to fit comfortably over the ghost’s head.
• Wall Extension (R4–R5): Holds 24 stitches for two rounds to give the hat depth.
• Sculpted Brim (R6): Uses a wave pattern of sc, hdc, dc, and tr stitches to shape the visor. The taller treble crochets (tr) build structural peaks that give the frog beanie its recognizable shape.

3. Eye Assemblies, Arms, and Assembly Breakdown:

• Layered Frog Eyes: Combining small white 5-sc magic rings with 10-sc green background sockets creates a high-contrast eye patch. Adding black safety eyes brings the frog face to life.
• Minimalist Ghost Arms: Simple 5-sc cylindrical tubes attached under the hat brim add an adorable waving pose.
• Final Touch Styling: Hot glue ensures crisp placement, while embroidered pink mouth details and powder blush add charm.

Pattern Question:

Question: How can I make sure the frog hat sits securely on the ghost without slipping or warping its shape?

Answer: To ensure the frog hat fits snuggly, place it onto the ghost head before attaching the ghost’s safety eyes. Position the hat so that the sculpted brim frames the front.

You can either use a hot glue gun to apply a thin ring of adhesive along the inside edge of the beanie, or use a yarn needle with green yarn to stitch around the base of the hat into the white ghost stitches. Adding the safety eyes right beneath the glued hat brim also helps anchor the layout in place!